Twin-tub, semi-automatic, top load or front load β we repair the machines that other companies have stopped bothering with. Honest advice on whether a repair is worth it, a fixed price before we start, and a technician who will climb the stairs.
We are an independent repair company β not an authorized service center of any washing machine brand. Brand names on this page are used only to identify the machines we repair. All trademarks belong to their respective owners.

Across Al Rigga, Naif, Al Muraqqabat, Hor Al Anz, Abu Hail and Salahuddin, a large share of the washing machines still in daily service are twin-tub and semi-automatic units, alongside older top loaders. These are not modern front loaders with sensors and control boards. They are mechanical machines, and repairing them is a genuinely different skill.
On a twin-tub, the faults are the timer, the wash motor, the spin motor, the drain valve, the gearbox and the pulsator. There is rarely a fault code to read, because there is no display to read it on. Diagnosis is done by listening, by testing continuity and by understanding how the mechanism is supposed to sequence. A technician trained only on modern machines will often struggle.
This is also the part of Dubai where a repair makes the most financial sense. The parts are mechanical and inexpensive, so a machine that would be written off elsewhere is frequently worth another several years of service for a modest cost.
Older machines, older buildings and heavy household use produce a very different fault profile from new Dubai.

From the oldest twin-tubs to modern front loaders in the newer buildings.
Separate wash and spin tubs. Timers, spin motors, drain valves and drive couplings.
Manual fill and drain machines β mechanical diagnosis, inexpensive parts, long remaining life.
Pulsator, clutch, gearbox, lid switch and drain valve repairs on full-size top loaders.
Modern machines in the newer Deira buildings β pumps, door locks, bearings and boards.
Machines in shared flats running many loads a day, where wear arrives fast.
Shop and commercial-grade machines across the Deira trading districts.
Combined units in the newer apartment blocks β heating and condenser faults.
Standalone spin units still widely used across older Deira households.
We would rather tell you the truth than sell you a repair. On the older machines common in Deira, most faults are mechanical parts that cost a fraction of a new machine β a drain valve, a timer, a belt, a capacitor or a spin motor. Those are almost always worth fixing, and the machine will typically give you several more years.
The exceptions are worth knowing. A machine with a cracked outer tub, a seized gearbox on a very old unit, or corrosion that has spread through the wiring loom is usually past the point of sensible repair. When our technician finds one of those, they will tell you straight and you pay only for the callout β not for a repair that was never going to last.
Tell us if it is twin-tub, semi-automatic, top load or front load β that decides what the technician brings.
Let us know the area, building and floor. Walk-ups are no problem, but it helps us plan the visit.
We confirm the building's waste is taking water before condemning anything inside your machine.
Exact cost before any work β and a straight answer if the machine is not worth repairing.
Full wash, drain and spin cycle run before we leave, and the work area left clean and dry.

Deira's brand mix leans heavily towards value and regional names that many repair companies will not take on, alongside the international brands. We repair all of them, and we hold or source the mechanical parts these machines actually need.
Independent notice: we are not an authorized service center for any of these brands; names are listed for identification only.
Back to the main service page, or straight to the fault your machine is showing.
Machine showing a code on the display? Find out what it means before you call. Error Codes Explained →
Our complete washing machine service β all types, all brands, all four emirates.
Including how to tell a machine fault apart from a blocked building waste stack.
Spin motors, belts and capacitors β the usual suspects on older machines.
Dead machine with no lights, or power but no cycle β two different faults.
What grinding, knocking and humming each tell you about the machine.
Same-day cover across the rest of Dubai.
Yes, and Deira is one of the areas where we repair them most. Twin-tub and semi-automatic machines are mechanically very different from modern front loaders β the common faults are timers, spin motors, drain valves, gearboxes and pulsators rather than control boards and sensors. Many repairers no longer bother with them; we do.
Very often yes, because the typical faults on these machines are inexpensive mechanical parts rather than expensive electronics. A drain valve, a timer or a spin motor usually costs a fraction of a new machine. Our technician gives you the fixed price first, and if the repair genuinely does not make sense against the machine's value we will say so plainly rather than take the job.
Usually. Many of the older machines in Deira use common mechanical components that are still widely available, and in some cases an equivalent part from a compatible model fits correctly. If a specific part genuinely cannot be sourced, we tell you before you spend anything further rather than after.
Yes. Walk-up buildings are normal across Deira and our technicians work in them every day. The repair is carried out in your flat, so there is no need to move the machine out of the building in the overwhelming majority of cases.
It can be, and it is worth checking before condemning the machine. In older Deira buildings the waste stack is shared, and a blockage further down the line can stop your machine draining even though the machine itself is perfectly healthy. Our technician checks whether the waste is taking water freely before recommending any part.
Twin-tub, semi-automatic or fully automatic β call us for a fixed price before any work and an honest answer on whether it is worth repairing.
Twin-tub, semi-automatic, top load or front load β plus your area and building. That tells the technician exactly what to bring.
+971 50 988 6591
Daily, 8:00 AM β 6:00 PM
+971 50 988 6591
A photo of the machine helps us identify the type